Precor EFX546 Manuel de service télécharger pdf (Page 58)

C546 Elliptical Fitness Crosstrainer

Page 58

Procedure 7.2 - Replacing the Display Enclosure or Upper PCA

(version 1)

Anti-static kits (part number 20024-101) can be ordered from Precor.

Removing the Display Enclosure

1. Set the on/off switch in the “off” position.

WARNING

Before continuing with this procedure, review the Warning and Caution statements listed in

Section One, Things You Should Know.

2. Remove the screws that secure the interconnect cable cover to the bottom of the display

backing plate. Remove the interconnect cover cable. See Diagram 7.4.

3. Remove the screws that secure the reading rack to the to the display backing plate. Remove

the reading rack.

4. Remove the screws that secure the display housing to the display backing plate.

5. Attach the wrist strap to your arm, then connect the ground lead of the wrist strap to the EFX

frame.

6. Disconnect the interconnect cable from the upper PCA.

7. If you are going to re-install the display enclosure without replacing the upper PCA...

THEN... OTHERWISE...

Skip to Step 10. Continue with the next step.

Removing and Replacing the Upper PCA

8. Carefully disconnect the keypad cable from the upper PCA.

9. Remove the screws that secure the upper PCA to the display enclosure.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 117 118

Pas de commentaire

Precor EFX546 Manuel de service Page 58