Precor EFX546 Manuel de service télécharger pdf (Page 105)

C546 Elliptical Fitness Crosstrainerl

Page 105

Procedure 7.28 - Replacing the Stub Tensioner

1. Set the on/off switch in the “off” position, then unplug the power cord from the wall outlet.

WARNING

Before continuing with this procedure, review the Warning and Caution statements listed in

Section One, Things You Should Know.

2. Remove the rear cover as described in Procedure 7.1.

3. Loosen the tension adjustment bolt to remove tension from the input belt. See Diagram

7.25.

Diagram 7.25 - Stub Tensioner Mounting

4. The early C546’s mounted the stub tensioner in a closed slot. If you have a unit with a

closed slot it is recommended that the slot be cut open with a hacksaw. Care must be taken

not to cut the belt or other adjacent parts. See Diagram 7.26.

Diagram 7.26 - Stub Tensioner Mounting Slot

Tension Adjustment Bolt

Stub Tensioner

Mounting Nut

Cut here

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 117 118

Pas de commentaire

Precor EFX546 Manuel de service Page 105