Precor Electronic Console with the Pulse Feature 903 Manuel d'utilisateur télécharger pdf (Page 9)

page 9

904 Assembly Procedures

To install the 904 electronic console, take the following steps:

1. Remove the handrail clamp from its box. Take the long and

short screws out of the handrail clamp using your fingers or

a Phillips head screwdriver. Set the screws aside.

2. Position the handrail clamp over the right handrail’s

micro-adjustment knob as shown in Diagram 6. Place

a hand on either side of the handrail clamp to gently

pull it apart so that you can slide it onto the handrail’s

foam grip and into position (about 8 inches above the

base of the foam grip).

Important: Do not mount the clamp on the painted surface

of the handrails.

Diagram 6

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 26 27

Pas de commentaire

Precor Electronic Console with the Pulse Feature 903 Manuel d'utilisateur Page 9