Precor 9.41si Manuel de service télécharger pdf (Page 27)

9.41S, 9.41Si Treadmill

Page 27

Procedure 6.4 - Replacing the Lift Motor

WARNING

Always turn off the circuit breaker and unplug the treadmill before you remove the treadmill hood.

Removing the Lift Motor

1. Remove the hood.

2. Disconnect the lift motor wiring assembly from the lower PCA.

3. Remove the ground wire from the lift motor ground stud on the treadmill frame.

Note:

Place a drop cloth under the treadmill to protect the flooring and to ensure that the treadmill

handrails are not scratched or damaged.

4. Place the treadmill on its right side.

5. Remove the bolt and nut that hold the top of the lift motor to the treadmill frame.

6. Remove the bolt and nut that secure the lift tube to the lift platform. Set aside the lift motor.

Diagram 6.1 - 9.41S, 9.41Si Lift Motor

1 2 ... 22 23 24 25 26 27 28 29 30 31

Pas de commentaire

Precor 9.41si Manuel de service Page 27